Home / Lanz / 700

Lanz 700 Specs ( 1962-1966 )

Compare Tractor

Production

Description Built in Mannheim, Baden-Württemberg, Germany
Manufacturer Lanz (a part of John Deere)

Engine

Engine type John Deere 2.7L 4-cyl diesel
Fuel tank 18.5 gal (70.0 L)
Bore/Stroke 3.875x3.50 inches (98 x 89 mm)
Coolant capacity 12.15 qts (11.5 L)
Description John Deere / diesel / 4-cylinder / liquid-cooled
Displacement 165.1 ci (2.7 L)
Firing order 1-3-4-2
Oil capacity 5.8 qts (5.5 L)
Power 53 hp (39.5 kW)
Rated RPM 2400
Starter volts 12

Transmission

Description Four gears (1-4) in three ranges (I, II, III) plus reverse range. Speeds in fourth gear are the same across all three forward ranges.
Gears 10 forward and 3 reverse
Oil capacity 32.8 qts (31.0 L)
Transmission type 10-speed constant mesh
Type constant mesh

Mechanical

Cab Open operator station.
Description Manual steering / Disc brakes
Drive type Two-wheel drive

Hydraulics

Pressure 2200 psi (151.7 bar)
Pump flow 4.2 gpm (15.9 lpm)
Type open center

Hitch

Rear lift 1764 lbs (800 kg)
Rear Type II

PTO

Engine RPM 540@2250
Mid PTO standard
Mid PTO Type 1000
Rear PTO Type 540/1000

Dimensions & Tires

Front tread 49.2 to 72.8 inches (124 to 184 cm)
Height (hood) 54.9 inches (139 cm)
Height (steering wheel) 62.6 inches (159 cm)
Length 133.5 inches (339 cm)
Rear tread 53.2 to 59.1 inches (135 to 150 cm)
Shipping weight 4775 lbs (2165 kg)
Wheelbase 76.8 inches (195 cm)
Width 65 inches*Minimum (165 cm)
Front tire 6.00-16
Rear tire 11-32
Weight 4775 lbs (2165 kg)
Wheelbase 76.8 inches (195 cm)
Ag front 6.00-16
Ag rear 11-32 / 9-32

700 Serial Number Location

Description Serial number plate on the right side of the tractor frame, above the front axle.

Lanz 700 attachments

Description front-end loader

References

Description 700: Lift even more - lift more safely published by John Deere / Operator's Manual 700 (16034) published in 1963

Speeds

Description With 11-32 rear tires.