Massey Ferguson 7626 Specs ( 2013-2014 )
Production
| Description | Row-Crop tractor / Built in Beauvais, France |
|---|---|
| Manufacturer | Massey Ferguson (a part of AGCO) |
Engine
| Engine type | Sisu 7.4L 6-cyl diesel |
|---|---|
| Bore/Stroke | 4.252x5.276 inches (108 x 134 mm) |
| Compression | 17.8:1 |
| Description | Sisu / turbocharged air-to-air aftercooled diesel / 6-cylinder 24-valve / liquid-cooled |
| Displacement | 449.4 ci (7.4 L) |
| Emission control | selective catalytic reduction (SCR) |
| Emissions | Interim Tier IV |
| Fuel system | electronic high-pressure common rail |
| Power (net) | 240 hp (179.0 kW) |
| Pre-heating | thermostart |
| Rated RPM | 2100 |
| Starter | electric |
| Starter volts | 12 |
| Drawbar (tested) | 177.8 hp (132.6 kW) |
| Engine (net) | 240 hp (179.0 kW) |
| PTO (claimed) | 195 hp (145.4 kW) |
| PTO (tested) | 233.9 hp (174.4 kW) |
Transmission
| Description | Six power shift gears in four ranges. |
|---|---|
| Gears | 24 forward and reverse |
| Transmission | Dyna-6 |
| Transmission type | 24-speed six-speed power shift |
| Type | six-speed power shift |
Mechanical
| Cab | Cab standard. Optional hydraulic OptiRide cab suspension. AGCOCOMMAND (optional); Auto-Guide 3000 (optional) |
|---|---|
| Description | Power steering / Hydraulic wet disc brakes |
| Differential lock | electro-hydraulic standard |
| Drive type | Four-wheel drive |
| Final drives | inboard planetary |
| Trailer brakes | hydraulic (optional) |
Capacity
| Exhaust fluid (DEF) | 14 gal (53.0 L) |
|---|---|
| Fuel | 114 gal (431.5 L) |
| Hydraulic system | 26.4 gal (99.9 L) |
Hydraulics
| Capacity | 26.4 gal (99.9 L) |
|---|---|
| Pressure | 2900 psi (200.0 bar) |
| SCV flow | 24.3 gpm (92.0 lpm) |
| Total flow | 29 gpm (109.8 lpm) |
| Type | closed-center load sensing (CCLS) |
| Valves | 3 (mechanical) |
Hitch
| Control | electronic lower link draft sensing |
|---|---|
| Drawbar | Cat. II with drop pin |
| Front Hitch | optional |
| Rear lift (at ends) | 14000 lbs (6350 kg) |
PTO
| Clutch | electro-hydraulic |
|---|---|
| Engine RPM | 540@1890 |
| Rear PTO | independent |
| Rear PTO Type | 540/1000 (1.375) |
Electrical
| Batteries | 2 |
|---|---|
| Battery volts | 12 |
| Charging amps | 120 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Bar rear axle | 86.69 inch length (2201 mm) |
|---|---|
| Front axle | 4WD / QuadLink Suspended 4WD |
| Height (cab) | 120.7 inches (306 cm) |
| Length | 203.6 inches (517 cm) |
| Long bar rear axle | 118.2 inch length (3002 mm) |
| Wheelbase | 117 inches (297 cm) |
| Weight | 15990 lbs (7253 kg) |
| Wheelbase | 117 inches (297 cm) |
Massey Ferguson 7626 Weight
| Max capacity | 30865 lbs (14000 kg) |
|---|---|
| Max Drawbar | 3527 lbs (1599 kg) |
| Shipping | 15990 lbs (7253 kg) |
OCED Tractor Test 2755
| Description | Diesel Dyna-6 4WDOctober 2012 - November 2012, Link: OCED Tractor Test 2755 file / PTO performance / Drawbar performance / Gear 3A used for power test. / Gear 1D used for pull test. |
|---|---|
| Fuel use | 12.7 gal/hour (48.1 l/hour) / 11.8 gal/hour (44.7 l/hour) / 12.5 gal/hour (47.3 l/hour) / 11.3 gal/hour (42.8 l/hour) |
| Max power | 233.9 hp (174.4 kW) / 177.8 hp (132.6 kW) |
| Max pull | 17760 lbs (8055 kg) |
| Power at rated engine speed | 205.8 hp (153.5 kW) |
| Power at rated PTO speed | 231.9 hp (172.9 kW) |
References
| Description | 7600 Series published in 2013, by Massey Ferguson |
|---|