Massey Ferguson 8680 Specs ( 2009-2013 )
Production
| Description | Row-Crop tractor / Built in Beauvais, France / Original price was $231,833 in 2009 |
|---|---|
| Manufacturer | Massey Ferguson (a part of AGCO) |
Engine
| Engine type | AGCO SISU POWER 8.4L 6-cyl diesel |
|---|---|
| Exhaust fluid (DEF) | 8 gal (30.3 L) |
| Fuel tank | 155.9 gal (SCR) (590.1 L) |
| Bore/Stroke | 4.37x5.71 inches (111 x 145 mm) |
| Compression | 16.7:1 |
| Description | AGCO SISU POWER 84CTA / turbocharged intercooled diesel / 6-cylinder / liquid-cooled / The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas. Engine optionally available with exhaust gas recirculation instead of SCR. |
| Displacement | 512.6 ci (8.4 L) |
| Emission control | selective catalytic reduction (SCR) |
| Emissions | Tier III |
| Fuel system | electronic high pressure common rail |
| Maximum Power | 350 hp (261.0 kW) |
| Power | 320 hp (238.6 kW) |
| Pre-heating | thermostart |
| Rated RPM | 2200 |
| Starter | electric |
| Starter volts | 12 |
| Torque | 1100 lb-ft (1491.6 Nm) |
| Torque RPM | 1500 |
| Drawbar (tested) | 240.7 hp (179.5 kW) |
| PTO (claimed) | 275 hp (205.1 kW) |
| PTO (tested) | 322.6 hp (240.6 kW) |
Transmission
| Description | continuously-variable transmission (CVT) |
|---|---|
| Gears | infinite forward and reverse |
| Transmission | Dyna-VT |
| Type | continuously-variable transmission (CVT) |
Mechanical
| Cab | Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control. |
|---|---|
| Description | Power steering / Hydraulic wet disc brakes |
| Differential lock | electro-hydraulic |
| Drive type | Four-wheel drive |
| Final drives | inboard planetary |
| Trailer brakes | hydraulic OptOptional |
Hydraulics
| Pressure | 2,901 psi (200.0 bar) |
|---|---|
| Pump flow | 26.4 gpm (99.9 lpm) |
| Total flow | 46.2 gpm (174.9 lpm) |
| Type | closed center load sensing |
| Valves | 4 to 6 |
Hitch
| Drawbar | Cat. 3 |
|---|---|
| Front Hitch | III |
| Front lift (at ends) | 11,020 lbs (4998 kg) |
| Rear lift (at 24"/610mm) | 21,336 lbs (9678 kg) |
| Rear lift (at ends) | 26,460 lbs (12002 kg) |
| Rear Type | III, IV |
PTO
| Clutch | electro-hydraulic |
|---|---|
| Engine RPM | 1000@1970 |
| Front PTO | independent OptOptional |
| Front PTO Type | 1000 (1.375) |
| Rear PTO | independent |
| Rear PTO Type | 1000E/1000 (1.75) |
Electrical
| Batteries | 2 |
|---|---|
| Battery CCA | 775 |
| Battery volts | 12 |
| Charging amps | 240 *Dual 120A alternators. |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Bar rear axle | 4.33 by 105 inches (109 by 2667 mm) / 4.33 by 118 inches (109 by 2997 mm) |
|---|---|
| Front axle | 4WD / Quadlink suspended |
| Front tread | 60.9 to 88.8 inches (154 to 225 cm) |
| Height (cab) | 133.1 inches (338 cm) |
| Length | 223.2 inches (566 cm) |
| Max weight | 38,890 lbs (17640 kg) |
| Rear tread | 58 to 5 inches (147 to 12 cm) / 58.5 to 119.5 inches (148 to 303 cm) |
| Shipping weight | 24,250 lbs (10999 kg) |
| Wheelbase | 122.2 inches (310 cm) |
| Front tire | 420/85R34 |
| Rear tire | 480/80R50 |
| Weight | 24,250 lbs (10999 kg) |
| Wheelbase | 122.2 inches (310 cm) |
| Standard tires (ag) | Front: 420/85R34. Rear: 480/80R50 |
Massey Ferguson 8680 attachments
| Description | front-end loader |
|---|
OCED Tractor Test 2499
| Description | Diesel SCR Dyna-VT 4WDOctober 2008 - March 2009, Link: OCED Tractor Test 2499 file / PTO performance / Drawbar performance / Pull at 8.4 KPH / Pull at 4.8 KPH |
|---|---|
| Fuel use | 15.6 gal/hour (59.0 l/hour) / 15.0 gal/hour (56.8 l/hour) / 15.7 gal/hour (59.4 l/hour) / 15.0 gal/hour (56.8 l/hour) |
| Max power | 316.6 hp (236.1 kW) / 240.7 hp (179.5 kW) |
| Max pull | 26680 lbs (12102 kg) |
| Power at rated engine speed | 281.2 hp (209.7 kW) |
| Power at rated PTO speed | 307.0 hp (228.9 kW) |
OCED Tractor Test 2559
| Description | Diesel IEGR Dyna-VT 4WDOctober 2009 - March 2010, Link: OCED Tractor Test 2559 file / PTO performance / Drawbar performance / Pull at 9.0 KPH / Pull at 5.1 KPH |
|---|---|
| Fuel use | 18.0 gal/hour (68.1 l/hour) / 17.2 gal/hour (65.1 l/hour) / 17.3 gal/hour (65.5 l/hour) / 17.2 gal/hour (65.1 l/hour) |
| Max power | 322.6 hp (240.6 kW) / 236.3 hp (176.2 kW) |
| Max pull | 26725 lbs (12122 kg) |
| Power at rated engine speed | 282.7 hp (210.8 kW) |
| Power at rated PTO speed | 305.6 hp (227.9 kW) |
References
| Description | MF 8600 Series published in 2009, by Massey Ferguson |
|---|
Tractor Tests
| Description | OECD 2499: diesel SCR Dyna-VT 4WD / OECD 2559: diesel IEGR Dyna-VT 4WD |
|---|