Minneapolis-Moline G940 Specs ( 1971-1973 )
Production
| Description | Row-Crop tractor / Original price was $13,000 in 1975 |
|---|---|
| Manufacturer | Minneapolis-Moline |
Engine
| Air cleaner | dry / dry |
|---|---|
| Bore/Stroke | 3.875x4.375 inches (98 x 111 mm) / 3.875x4.375 inches (98 x 111 mm) |
| Compression | 16:1 / 8.5:1 |
| Coolant capacity | 20 qts (18.9 L) |
| Description | Oliver-Waukesha / turbocharged diesel / 6-cylinder / liquid-cooled / Oliver-Waukesha / gasoline / 6-cylinder / liquid-cooled |
| Displacement | 310 ci (5.1 L) / 310 ci (5.1 L) |
| Rated RPM | 2400 / 2400 |
| Starter volts | 12 |
| Engine type | Oliver-Waukesha 5.1L 6-cyl diesel / Oliver-Waukesha 5.1L 6-cyl gasoline |
| Engine type | Oliver-Waukesha 5.1L 6-cyl diesel / Oliver-Waukesha 5.1L 6-cyl gasoline |
| Fuel tank | 35 gal (132.5 L) |
| Drawbar (tested) | 82.65 hp (61.6 kW) |
| PTO (claimed) | 92 hp (gas) (68.6 kW) |
| PTO (tested) | 98.60 hp (73.5 kW) |
Transmission
| Clutch | 330mm cerametallic disc / 330mm cerametallic disc |
|---|---|
| Description | The Hydraul-Shift overs a power shift between over-, under-, and direct-drive for each gear. |
| Gears | 6 forward and 2 reverse / 18 forward and 6 reverse |
| Transmission | Hydraul-Shift |
| Type | gear / partial power shift |
| Transmission type | 6-speed gear / 18-speed partial power shift |
| Transmission type | 6-speed gear / 18-speed partial power shift |
Mechanical
| Cab | Open operator station. Optional two-post ROPS and cab. |
|---|---|
| Description | Power steering / Differential hydraulic disc brakes |
| Drive type | Two- or four-wheel drive |
Hydraulics
| Pressure | 2200 psi (151.7 bar) |
|---|---|
| Pump flow | 20 gpm (75.7 lpm) |
| Type | closed center |
Hitch
| Rear lift | 4,000 lbs (1814 kg) |
|---|---|
| Rear Type | I/II |
PTO
| Engine RPM | 984@2400 |
|---|---|
| Rear PTO | independent |
| Rear PTO Type | 540 |
Dimensions & Tires
| 2WD Front tread | 61.5 to 87.5 inches (156 to 222 cm) |
|---|---|
| 2WD Ground clearance | 25.5 inches (64 cm) |
| 2WD Length | 159.5 inches (405 cm) |
| 2WD Wheelbase | 103 inches (261 cm) |
| 4WD Front tread | 60/70.75/80 inches (152/179/203 cm) |
| 4WD Ground clearance | 13.5 inches (34 cm) |
| 4WD Length | 152.375 inches (387 cm) |
| 4WD Wheelbase | 86.25 inches (219 cm) |
| Height (steering wheel) | 85.5 inches (217 cm) |
| Rear tread | 57 to 119.5 inches (144 to 303 cm) |
| Weight | 11,150 lbs (5057 kg) |
| Width | 80.625 inches*Minimum width (204 cm) |
| 2WD Wheelbase | 103 inches (261 cm) |
| 4WD Wheelbase | 86.25 inches (219 cm) |
| Front tire | 11L-15 |
| Rear tire | 23.1-34 |
| Weight | 11,150 lbs (5057 kg) |
| Ag front | 11L-15 |
| Ag rear | 23.1-34 |
G940 Serial Numbers
| 1969 | 220-640 |
|---|---|
| 1970 | 221-099 |
| 1971 | 225-508 |
| 1972 | 231-366 |
| 1973 | 236-585 |
| 1974 | 247-436 |
| 1975 | 255-727 |
| Description | FAQ: How to read a serial number table. |
| Final | 255-785 |
Nebraska Tractor Test 1040
| Description | Diesel 18-speed 2WDMay 5 - 22, 1970Link: Nebraska Tractor Test 1040 file / PTO performance / Drawbar performance / Gear 3-direct used for power test. / Gear 1-over used for pull test. |
|---|---|
| Fuel use | 6.2 gal/hour (23.5 l/hour) / 6.0 gal/hour (22.7 l/hour) |
| Max power | 82.65 hp (61.6 kW) |
| Max pull | 11,487 lbs (5210 kg) |
| Power at rated engine speed | 98.60 hp (73.5 kW) |
References
| Description | Models G850/G940 published in 1971, by Minneapolis-Moline / Technical Service Manual 55 Series Tractor Engines (432618) published in 1973 / Technical Service Manual 55 Series Tractor Hydraulics (432616) published in 1973 |
|---|
Speeds
| Description | With 18.4-34 rear tires. / With 18.4-34 rear tires. |
|---|