Home / Steiger / Panther III ST-320

Steiger Panther III ST-320 Specs ( 1976-1977 )

Compare Tractor

Production

Description Built in Fargo, North Dakota, USA / Original price was $60,500 in 1977
Drive type Four-wheel Drive (4WD) tractor
Manufacturer Steiger

Engine

Engine type Cummins 14.8L 8-cyl diesel
Fuel tank 267 gal (1010.6 L)
Bore/Stroke 5.50x4.75 inches (140 x 121 mm)
Compression 15.5:1
Description Cummins VT903 / turbocharged diesel / 8-cylinder / liquid-cooled V8
Displacement 903 ci (14.8 L)
Power 320 hp (238.6 kW)
Rated RPM 2600
Starter electric
Starter volts 12
Drawbar (claimed) 270 hp (201.3 kW)
Drawbar (tested) 262.13 hp (195.5 kW)

Transmission

Gears 20 forward and 4 reverse
Transmission Spicer SST 1010-2A
Transmission type 20-speed

Mechanical

Cab Safari Cab
Description Articulated power steering
Drive type Four-wheel drive
Final drives outboard planetary

Hydraulics

Steering press. 2100 psi (144.8 bar)
Type open center
Valves 4

Hitch

Rear Type III OptOptional

Electrical

Batteries 2
Battery volts 12
Ground negative

Dimensions & Tires

Ground clearance 20 inches (50 cm)
Length 252 inches (640 cm)
Max weight 34000 lbs (15422 kg)
Weight 26000 lbs (11793 kg)
Wheelbase 128 inches (325 cm)
Front tire 24.5-32
Rear tire 24.5-32
Weight 26000 lbs (11793 kg)
Wheelbase 128 inches (325 cm)
Ag front 24.5-32 / 18.4-34
Ag rear 24.5-32 / 18.4-34

Nebraska Tractor Test 1169

Description Diesel 10-speed 4WDNovember 15 - 26, 1974Link: Nebraska Tractor Test 1169 file / Drawbar performance / Gear 3-Hi used for power test. / Gear 2-Lo used for pull test.
Fuel use 18.9 gal/hour (71.5 l/hour)
Max power 262.13 hp (195.5 kW)
Max pull 28097 lbs (12744 kg)

Panther III ST-320 Serial Numbers

1976 108-00001
1977 108-00187
Description FAQ: How to read a serial number table.

References

Description Operator's Manual Panther III (37-049) published in 1974 / Series III published in 1976, by Steiger

Steiger Panther III ST-320 Height

Cab 135 inches (342 cm)
Exhaust 156 inches (396 cm)
Hood 95 inches (241 cm)