Home / Steiger / Panther III ST-325

Steiger Panther III ST-325 Specs ( 1976-1983 )

Compare Tractor

Production

Description Built in Fargo, North Dakota, USA / Original price was $103,000 in 1983
Drive type Four-wheel Drive (4WD) tractor
Manufacturer Steiger

Engine

Engine type Caterpillar 14.6L 6-cyl diesel
Fuel tank 267 gal (1010.6 L)
Bore/Stroke 5.40x6.50 inches (137 x 165 mm)
Compression 14.5:1
Coolant capacity 70 qts (66.2 L)
Description Caterpillar 3406DIT / turbocharged diesel / 6-cylinder / liquid-cooled inline
Displacement 893 ci (14.6 L)
Oil capacity 36 qts (34.1 L)
Power 325 hp (242.4 kW)
Rated RPM 2100
Starter electric
Starter volts 12
Torque 1015 lb-ft (1376.3 Nm)
Torque RPM 1200
Drawbar (tested) 269.86 hp (201.2 kW)

Transmission

Clutch hydraulic dry discs / 393.7mm dry disc
Description Ten-speed transmission with two-speed transfer case.
Gears 10 forward and 2 reverse / 20 forward and 4 reverse
Transmission Dana-Spicer 1010-3B
Transmission type 10-speed / 20-speed
Transmission type 10-speed / 20-speed

Mechanical

Cab Safari Cab standard with heat and air-conditioning.
Description Articulated power steering / Hydraulic disc brakes
Drive type Four-wheel drive
Final drives outboard planetary

Hydraulics

Pressure 2250 psi (155.1 bar)
Pump flow 31.9 gpm (120.7 lpm)
Type open center
Valves 3 to 5

Hitch

Rear Type III OptOptional

Electrical

Batteries 2
Battery AH 208
Battery Group 8D
Battery volts 12
Charging amps 90
Charging system alternator
Ground negative

Dimensions & Tires

Clearance (rear axle) 20 inches (50 cm)
Height (exhaust) 155.8 inches (395 cm)
Length 252 inches (640 cm)
Max weight 34000 lbs (15422 kg)
Shipping weight 26900 lbs (12201 kg)
Wheelbase 128 inches (325 cm)
Width 96 inches (tractor body) (243 cm)
Front tire 24.5-32
Rear tire 24.5-32
Weight 26900 lbs (12201 kg)
Wheelbase 128 inches (325 cm)
Ag front 24.5-32 / 18.4-30
Ag rear 24.5-32 / 18.4-30

Nebraska Tractor Test 1236

Description Diesel 10-speed 4WDApril 11 - May 2, 1977Link: Nebraska Tractor Test 1236 file / Drawbar performance / Gear 5 used for power test. / Gear 2 used for pull test.
Fuel use 18.2 gal/hour (68.9 l/hour)
Max power 269.86 hp (201.2 kW)
Max pull 28,189 lbs (12786 kg)

Panther III ST-325 Serial Numbers

1976 123-00001
1977 123-00123
1978 123-00370
1979 123-00627
1980 123-00887
1981 123-01124
1982 123-01501
1983 123-02501
Description FAQ: How to read a serial number table.

References

Description ST Tractors published in 1981, by Steiger / ST Tractors published in 1982, by Steiger / ST Tractors - Caterpillar Powered Series III Cougar ST 270 and Panther ST 325 published in 1979, by Steiger / Series III published in 1976, by Steiger