Home / Steiger / Panther IV CM-325

Steiger Panther IV CM-325 Specs ( 1983-1985 )

Compare Tractor

Production

Description Built in Fargo, North Dakota, USA
Drive type Four-wheel Drive (4WD) tractor
Manufacturer Steiger

Engine

Engine type Caterpillar 14.6L 6-cyl diesel
Fuel tank 267 gal (1010.6 L)
Bore/Stroke 5.40x6.50 inches (137 x 165 mm)
Coolant capacity 70 qts (66.2 L)
Description Caterpillar 3406 / turbocharged diesel / 6-cylinder / liquid-cooled inline
Displacement 893 ci (14.6 L)
Oil capacity 36 qts (34.1 L)
Operating RPM 1700-2100
Power 325 hp (242.4 kW)
Rated RPM 2100
Starter volts 12
Torque 1050 lb-ft (1423.8 Nm)
Torque RPM 1200
Drawbar (claimed) 273 hp (203.6 kW)

Transmission

Gears 20 forward and 4 reverse
Transmission Spicer SST 1010
Transmission type 20-speed Constant mesh 10-speed transmission with 2-speed transfer case.
Type Constant mesh 10-speed transmission with 2-speed transfer case.

Mechanical

Cab Steiger Safari Cab standard with air-conditioning.
Description Articulated power steering / Hydraulic disc brakes
Drive type Four-wheel drive

Hydraulics

Pressure 2250 psi (155.1 bar)
Pump flow 31 gpm (117.3 lpm)
Type open center load sensing
Valves 3 to 5

Hitch

Rear Type III OptOptional

Electrical

Batteries 3
Battery volts 12
Charging amps 90
Charging system alternator

Dimensions & Tires

Front tread 79 to 136.3 inches (200 to 346 cm)
Length 253.6 inches (644 cm)
Max weight 34000 lbs (15422 kg)
Rear tread 79 to 136.3 inches (200 to 346 cm)
Shipping weight 26903 lbs (12203 kg)
Wheelbase 129 inches (327 cm)
Width 96 inches*Width at fenders (243 cm)
Front tire 23.1x34
Rear tire 23.1x34
Weight 26903 lbs (12203 kg)
Wheelbase 129 inches (327 cm)
Ag front 23.1x34 / 20.8x34
Ag rear 23.1x34 / 20.8x34

Panther IV CM-325 Serial Number Location

Description Serial number plate on the left-side fender.

Panther IV CM-325 Serial Numbers

1983 123-03001
1984 123-03201
1985 123-05001
Description FAQ: How to read a serial number table.

References

Description Panther IV published in 1983, by Steiger / The Steiger Line published in 1983

Steiger Panther IV CM-325 Height

Cab 134.8 inches (342 cm)
Exhaust 155.8 inches (395 cm)
Hood 94.8 inches (240 cm)

Variants

CM325 Caterpillar gear shift
CS325 Caterpillar power shift
KM325 Cummins gear shift
KS325 Cummins power shift
SM325 Komatsu gear shift