Home / New Holland / T9020

New Holland T9020 Specs ( 2007-2010 )

Compare Tractor

Production

Description Built in Fargo, North Dakota, USA
Drive type Four-wheel Drive (4WD) tractor
Manufacturer New Holland

Engine

Engine type CDC 8.9L 6-cyl diesel
Fuel tank 200 gal (757.0 L)
Bore/Stroke 4.488x5.689 inches (114 x 145 mm)
Compression 16.6:1
Coolant capacity 50 qts (47.3 L)
Description CDC / turbocharged aftercooled diesel / 6-cylinder 24-valve / liquid-cooled
Displacement 540 ci (8.9 L)
Maximum Power 368 hp (274.4 kW)
Oil capacity 29 qts (27.4 L)
Power 335 hp (249.8 kW)
Rated RPM 2000
Starter electric
Starter volts 24
Torque 1198 lb-ft (1624.5 Nm)
Torque RPM 1400
Drawbar (tested) 258.63 hp (192.9 kW)
PTO (claimed) 274 hp (204.3 kW)
PTO (tested) 323.31 hp (241.1 kW)

Transmission

Gears 16 forward and 2 reverse / 24 forward and 6 reverse
Type full power shift / full synchro shift
Transmission type 16-speed full power shift / 24-speed full synchro shift
Transmission type 16-speed full power shift / 24-speed full synchro shift

Mechanical

Cab Cab standard with heat and air-conditioning
Description Integral hydraulic wet disc brakes
Drive type Four-wheel drive
Steering hydrostatic power

Hydraulics

Pressure 2000 psi (137.9 bar)
Pump flow 33 gpm (124.9 lpm)
Total flow 40 gpm (151.4 lpm)
Type closed center load sensing (CCLS)
Valves 4 to 9

Hitch

Rear lift (at 24"/610mm) 15,669 lbs (7107 kg)
Rear Type IVN/III (optional)

PTO

Rear PTO independent
Rear PTO Type 1000 (optional)

Electrical

Batteries 2
Battery AH 1000
Battery volts 12
Charging amps 150
Charging system alternator
Ground negative

Dimensions & Tires

Height 142 inches (360 cm)
Length 276 inches (701 cm)
Max weight 39,600 lbs (17962 kg)
Operating weight 32,120 lbs (14569 kg)
Wheelbase 139 inches (353 cm)
Front tire 710/70R42
Rear tire 710/70R42
Weight 32,120 lbs (14569 kg)
Wheelbase 139 inches (353 cm)
Ag front 710/70R42
Ag rear 710/70R42

OCED Tractor Test 1907A

Description Diesel 16-speed 4WDSeptember 19 - October 22, 2007Link: OCED Tractor Test 1907A file / PTO performance / Drawbar performance / Gear 5 used for power test. / Gear 3 used for pull test.
Fuel use 18.0 gal/hour (68.1 l/hour) / 17.0 gal/hour (64.3 l/hour) / 16.9 gal/hour (64.0 l/hour)
Max power 323.31 hp (241.1 kW) / 258.63 hp (192.9 kW)
Max pull 31,197 lbs (14150 kg)
Power at rated engine speed 285.76 hp (213.1 kW)