Home / New Holland / TN60A

New Holland TN60A Specs ( 2004-2008 )

Compare Tractor

Production

Description Utility tractor / Built in Jesi, Italy
Manufacturer New Holland

Engine

Engine type Iveco 2.9L 3-cyl diesel
Fuel tank 23 gal (87.1 L)
Air cleaner dual paper elements
Bore/Stroke 4.094x4.528 inches (104 x 115 mm)
Compression 17:1
Description Iveco / diesel / 3-cylinder / liquid-cooled
Displacement 179 ci (2.9 L)
Emissions Tier 2
Fuel use 3.00 gal/hour (11.4 l/hour)
Power (gross) 57 hp (42.5 kW)
Power (net) 55 hp (41.0 kW)
Rated RPM 2300
Starter electric
Starter volts 12
Torque 148 lb-ft (200.7 Nm)
Torque RPM 1400
Drawbar (tested) 38.4 hp (28.6 kW)
Engine (gross) 57 hp (42.5 kW)
Engine (net) 55 hp (41.0 kW)
PTO (claimed) 45 hp (33.6 kW)
PTO (tested) 48.3 hp (36.0 kW)

Transmission

Clutch 280mm dry cerametallic plate / 280mm dry cerametallic plate / 280mm dry cerametallic plate / six 113mm wet organic discs
Description Left-hand mechanical shuttle required clutching. / Four synchronized gears in three ranges. Left-hand mechanical shuttle requires clutching. / Left-hand mechanical shuttle requires clutching. / Clutchless left-hand power shuttle.
Gears 8 forward and reverse / 12 forward and reverse / 16 forward and reverse / 16 forward and reverse
Transmission Synchro Command / Synchro Command Plus / Synchro Command Plus
Type constant mesh with mechanical shuttle / partially synchronized with mechanical shuttle / partially synchronized with mechanical shuttle / partially synchronized with power shuttle
Transmission type 8-speed constant mesh with mechanical shuttle / 12-speed partially synchronized with mechanical shuttle / 16-speed partially synchronized with mechanical shuttle / 16-speed partially synchronized with power shuttle
Transmission type 8-speed constant mesh with mechanical shuttle / 12-speed partially synchronized with mechanical shuttle / 16-speed partially synchronized with mechanical shuttle / 16-speed partially synchronized with power shuttle

Mechanical

Description Differential wet disc brakes / ROPS. Canopy optional.
Differential lock mechanical rear
Drive type Two- or four-wheel drive
Steering hydrostatic power

Hydraulics

Pressure 2755 psi (190.0 bar)
Pump flow 12.4 gpm (46.9 lpm)
Steering flow 7.2 gpm (27.3 lpm)
Type open center
Valves 1 to 4

Hitch

Rear lift (at 24"/610mm) 3960 lbs (1796 kg)
Rear Type II/I

PTO

Rear PTO independent
Rear PTO Type 540 (1.375)

Electrical

Battery CCA 730
Battery volts 12
Charging amps 65
Charging system alternator
Ground negative

Dimensions & Tires

2WD, 78.9 4WD} Wheelbase 81.5 inches (207 cm)
2WD Length 153.3 inches (389 cm)
4WD Length 151.6 inches (385 cm)
Height (Folded ROPS) 75.1 inches (190 cm)
Height (ROPS) 95.1 inches (241 cm)
Width 67.2 inches (170 cm)
2WD, 78.9 4WD} Wheelbase 81.5 inches (207 cm)
Front tire 9.5x15
Rear tire 14.9
Weight 5180 to 5400 pounds
2WD Ag front 9.5x15
4WD Ag front 11.2x20
Ag rear 14.9

New Holland TN60A Weight

2WD 5180 lbs (2349 kg)
4WD 5400 lbs (2449 kg)
Ballasted 6460 lbs (2930 kg)

New Holland TN60A attachments

Description front-end loader

OCED Tractor Test 2158

Description Diesel 16-speed 2WDMarch 1 - April 1, 2004Link: OCED Tractor Test 2158 file / PTO performance / Drawbar performance / Gear 3M Lo used for power test. / Gear 1M Lo used for pull test.
Fuel use 3.0 gal/hour (11.4 l/hour) / 3.0 gal/hour (11.4 l/hour) / 3.0 gal/hour (11.4 l/hour)
Max power 48.3 hp (36.0 kW) / 38.4 hp (28.6 kW)
Max pull 6,135 lbs (2782 kg)
Power at rated engine speed 48.0 hp (35.8 kW)
Power at rated PTO speed 47.5 hp (35.4 kW)

References

Description TN-A Series Utility Tractors published in 2005, by New Holland / TN-A Series Utility Tractors published in 2006, by New Holland

Variants

JX1060C similar CaseIH model
TN60A ROPS
TN60DA cab
TN60SA SuperSteer