New Holland TN75A Specs ( 2004-2008 )
Production
| Description | Utility tractor / Built in Jesi, Italy |
|---|---|
| Manufacturer | New Holland |
Engine
| Engine type | Iveco 2.9L 3-cyl diesel |
|---|---|
| Fuel tank | 23 gal (87.1 L) |
| Air cleaner | dual paper elements |
| Bore/Stroke | 4.094x4.528 inches (104 x 115 mm) |
| Compression | 16.5:1 |
| Description | Iveco / turbocharged diesel / 3-cylinder / liquid-cooled |
| Displacement | 179 ci (2.9 L) |
| Emissions | Tier 2 |
| Fuel use | 3.94 gal/hour (14.9 l/hour) |
| Power (gross) | 75 hp (55.9 kW) |
| Power (net) | 72 hp (53.7 kW) |
| Rated RPM | 2300 |
| Starter | electric |
| Starter volts | 12 |
| Torque | 220 lb-ft (298.3 Nm) |
| Torque RPM | 1400 |
| Drawbar (tested) | 54.7 hp (40.8 kW) |
| Engine (gross) | 75 hp (55.9 kW) |
| Engine (net) | 72 hp (53.7 kW) |
| PTO (claimed) | 62 hp (46.2 kW) |
| PTO (tested) | 64.4 hp (48.0 kW) |
Transmission
| Clutch | 280mm dry cerametallic plate / 280mm dry cerametallic plate / 280mm dry cerametallic plate / six 113mm wet organic discs |
|---|---|
| Description | Left-hand synchronized mechanical shuttle requires clutching. / Four synchronized gears with three ranges. Left-hand synchronized mechanical shuttle requires clutching. / Left-hand synchronized mechanical shuttle requires clutching. / Left-hand clutchless power shuttle. |
| Gears | 8 forward and reverse / 12 forward and reverse / 16 forward and reverse / 16 forward and reverse |
| Transmission | Synchro Command / Synchro Command Plus / Synchro Command Plus |
| Type | constant mesh with mechanical shuttle / partially synchronized with mechanical shuttle / partially synchronized with mechanical shuttle / partially synchronized with power shuttle |
| Transmission type | 8-speed constant mesh with mechanical shuttle / 12-speed partially synchronized with mechanical shuttle / 16-speed partially synchronized with mechanical shuttle / 16-speed partially synchronized with power shuttle |
| Transmission type | 8-speed constant mesh with mechanical shuttle / 12-speed partially synchronized with mechanical shuttle / 16-speed partially synchronized with mechanical shuttle / 16-speed partially synchronized with power shuttle |
Mechanical
| Description | Differential wet disc brakes / ROPS. Canopy optional |
|---|---|
| Differential lock | mechanical rear |
| Drive type | Two- or four-wheel drive |
| Steering | hydrostatic power |
Hydraulics
| Pressure | 2755 psi (190.0 bar) |
|---|---|
| Pump flow | 16.9 gpm (64.0 lpm) |
| Steering flow | 7.4 gpm (28.0 lpm) |
| Type | open center |
| Valves | 1 to 4 |
Hitch
| Rear lift (at 24"/610mm) | 3960 lbs (1796 kg) |
|---|---|
| Rear Type | II/I |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
Electrical
| Battery CCA | 730 |
|---|---|
| Battery volts | 12 |
| Charging amps | 65 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| 2WD Length | 153.3 inches (389 cm) |
|---|---|
| 2WD Wheelbase | 81.5 inches (207 cm) |
| 4WD Length | 151.6 inches (385 cm) |
| 4WD Wheelbase | 78.9 inches (200 cm) |
| Height (Folded ROPS) | 75.1 inches (190 cm) |
| Height (ROPS) | 95.1 inches (241 cm) |
| Width | 67.2 inches (170 cm) |
| 2WD Wheelbase | 81.5 inches (207 cm) |
| 4WD Wheelbase | 78.9 inches (200 cm) |
| Weight | 5020 to 5810 pounds |
New Holland TN75A Weight
| 2WD Operating | 5,215 lbs (2365 kg) |
|---|---|
| 2WD Shipping | 5,020 lbs (2277 kg) |
| 4WD Operating | 5,810 lbs (2635 kg) |
| 4WD Shipping | 5,415 lbs (2456 kg) |
| Ballasted | 7,055 lbs (3200 kg) |
New Holland TN75A attachments
| Description | front-end loader |
|---|
OCED Tractor Test 2130
| Description | Diesel 16-speed 4WDOctober 1, 2003 - April 1, 2004Link: OCED Tractor Test 2130 file / PTO performance / Drawbar performance / Gear 3M Lo used for power test. / Gear 1M Hi used for pull test. |
|---|---|
| Fuel use | 4.0 gal/hour (15.1 l/hour) / 3.9 gal/hour (14.8 l/hour) / 3.9 gal/hour (14.8 l/hour) / 3.8 gal/hour (14.4 l/hour) |
| Max power | 64.4 hp (48.0 kW) / 54.7 hp (40.8 kW) |
| Max pull | 6,135 lbs (2782 kg) |
| Power at rated engine speed | 63.6 hp (47.4 kW) |
| Power at rated PTO speed | 63.6 hp (47.4 kW) |
References
| Description | TN-A Series Utility Tractors published in 2005, by New Holland / TN-A Series Utility Tractors published in 2006, by New Holland |
|---|
Variants
| JX1075C | similar CaseIH model |
|---|---|
| TN75A | ROPS |
| TN75DA | cab |
| TN75FA | narrow/orchard |
| TN75SA | SuperSteer |