New Holland TN85A Specs ( 2004-2008 )
Production
| Description | Utility tractor / Built in Jesi, Italy |
|---|---|
| Manufacturer | New Holland |
Engine
| Engine type | Iveco 4.5L 4-cyl diesel |
|---|---|
| Fuel tank | 23.5 gal (88.9 L) |
| Air cleaner | dual paper elements |
| Bore/Stroke | 4.094x5.197 inches (104 x 132 mm) |
| Compression | 17.5:1 |
| Description | Iveco / diesel / 4-cylinder / liquid-cooled |
| Displacement | 274 ci (4.5 L) |
| Emissions | Tier 2 |
| Fuel use | 4.82 gal/hour (18.2 l/hour) |
| Power (gross) | 80 hp (59.7 kW) |
| Rated RPM | 2300 |
| Starter | electric |
| Starter volts | 12 |
| Torque | 236 lb-ft (320.0 Nm) |
| Torque RPM | 1400 |
| Drawbar (tested) | 61.2 hp (45.6 kW) |
| Engine (gross) | 80 hp (59.7 kW) |
| PTO (claimed) | 69 hp (51.5 kW) |
| PTO (tested) | 72.0 hp (53.7 kW) |
Transmission
| Clutch | 280mm dry cerametallic plate / 280mm dry cerametallic plate / six 113mm wet organic plates |
|---|---|
| Description | Four synchronized gears with three ranges. Left-hand synchronized mechanical shuttle requires clutching. / Left-hand synchronized mechanical shuttle requires clutching. / Left-hand clutchless power shuttle. |
| Gears | 12 forward and reverse / 16 forward and reverse / 16 forward and reverse |
| Transmission | Synchro Command / Synchro Command Plus / Synchro Command Plus |
| Type | partially synchronized with mechanical shuttle / partially synchronized with mechanical shuttle / partially synchronized with power shuttle |
| Transmission type | 12-speed partially synchronized with mechanical shuttle / 16-speed partially synchronized with mechanical shuttle / 16-speed partially synchronized with power shuttle |
| Transmission type | 12-speed partially synchronized with mechanical shuttle / 16-speed partially synchronized with mechanical shuttle / 16-speed partially synchronized with power shuttle |
Mechanical
| Description | Differential wet disc brakes / ROPS. Canopy optional |
|---|---|
| Differential lock | mechanical rear |
| Drive type | Two- or four-wheel drive |
| Steering | hydrostatic power |
Hydraulics
| Pressure | 2755 psi (190.0 bar) |
|---|---|
| Pump flow | 15 gpm (56.8 lpm) |
| Steering flow | 9.4 gpm (35.6 lpm) |
| Type | open center |
| Valves | 1 to 4 |
Hitch
| Rear lift (at 24"/610mm) | 3960 lbs (1796 kg) |
|---|---|
| Rear Type | II/I |
PTO
| Engine RPM | 540@2196 |
|---|---|
| Rear PTO | independent |
| Rear PTO Type | 540 (1.375) |
Electrical
| Battery CCA | 730 |
|---|---|
| Battery volts | 12 |
| Charging amps | 65 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| 2WD Shipping weight | 6008 lbs (2725 kg) |
|---|---|
| 2WD Wheelbase | 86.7 inches (220 cm) |
| 4WD Shipping weight | 6118 lbs (2775 kg) |
| 4WD Wheelbase | 83.7 inches (212 cm) |
| Height (Folded ROPS) | 75.1 inches (190 cm) |
| Height (ROPS) | 95.1 inches (241 cm) |
| Length | 157.5 inches (2WD) (400 cm) |
| Width | 67.2 inches (170 cm) |
| 2WD Wheelbase | 86.7 inches (220 cm) |
| 4WD Wheelbase | 83.7 inches (212 cm) |
| Weight | 6008 to 6118 pounds |
OCED Tractor Test 2349
| Description | Diesel 16-speed 4WDJuly 1 - October 1, 2005Link: OCED Tractor Test 2349 file / PTO performance / Drawbar performance / Gear 4M-Low used for power test. / Gear 2M-Low used for pull test. |
|---|---|
| Fuel use | 4.8 gal/hour (18.2 l/hour) / 4.8 gal/hour (18.2 l/hour) / 4.8 gal/hour (18.2 l/hour) / 4.7 gal/hour (17.8 l/hour) |
| Max power | 72.0 hp (53.7 kW) / 61.2 hp (45.6 kW) |
| Max pull | 6775 lbs (3073 kg) |
| Power at rated engine speed | 71.7 hp (53.5 kW) |
| Power at rated PTO speed | 71.6 hp (53.4 kW) |
References
| Description | New 4-Cylinders published in 2005, by New Holland / TN-A Series Utility Tractors published in 2006, by New Holland |
|---|
Variants
| JX1085C | similar CaseIH model |
|---|---|
| TN85A | ROPS |
| TN85DA | cab |
| TN85FA | narrow/orchard |