New Holland Workmaster 25S Specs ( 2018-Present )
Production
| Description | Sub-Compact Utility tractor / Built in South Korea |
|---|---|
| Distributor | New Holland (a part of CNH) |
| Manufacturer | LS |
Engine
| Engine type | Yanmar 1.3L 3-cyl diesel |
|---|---|
| Fuel tank | 6.6 gal (25.0 L) |
| Bore/Stroke | 3.15x3.30 inches (80 x 84 mm) |
| Description | Yanmar 3TNV80F / diesel / 3-cylinder / liquid-cooled |
| Displacement | 77.2 ci (1.3 L) |
| Emissions | Tier IV |
| Power (gross) | 24.7 hp (18.4 kW) |
| Pre-heating | glow plugs |
| Rated RPM | 3000 |
| Starter | electric |
| Starter volts | 12 |
| Engine (gross) | 24.7 hp (18.4 kW) |
| PTO (claimed) | 17.2 hp (12.8 kW) |
Transmission
| Description | hydrostatic |
|---|---|
| Gears | infinite forward and reverse (2-range) |
| Type | hydrostatic |
Mechanical
| Description | Power steering / Wet disc brakes / Two-post folding ROPS. |
|---|---|
| Differential lock | mechanical rear |
| Drive type | Four-wheel drive |
Hydraulics
| Pump flow | 4.6 gpm (17.4 lpm) |
|---|---|
| Steering flow | 2.1 gpm (7.9 lpm) |
| Total flow | 6.7 gpm (25.4 lpm) |
| Type | open center |
| Valves | 1 OptOptional |
Hitch
| Rear lift (at 24"/610mm) | 728 lbs (330 kg) |
|---|---|
| Rear lift (at ends) | 992 lbs (449 kg) |
| Rear Type | I |
PTO
| Clutch | electro-hydraulic |
|---|---|
| Mid PTO | independent |
| Mid PTO Type | 2500 |
| Rear PTO | independent |
| Rear PTO Type | 540 (1.375) |
Electrical
| Battery AH | 45 |
|---|---|
| Battery CCA | 430 |
| Battery volts | 12 |
| Charging amps | 40 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Description | Flange rear axle |
|---|---|
| Front tread | 36.1 inches (91 cm) |
| Height (ROPS) | 87.4 inches (221 cm) |
| Length | 97.4 inches (247 cm) |
| Rear tread | 34.6 inches (87 cm) |
| Weight | 1444 lbs (654 kg) |
| Wheelbase | 56.1 inches (142 cm) |
| Width | 46.7 inches (118 cm) |
| Weight | 1444 lbs (654 kg) |
| Wheelbase | 56.1 inches (142 cm) |
| Industrial front | 18x8.50-10 |
| Industrial rear | 26x12.00-12 |
| Lawn/turf front | 18x8.50-10 |
| Lawn/turf rear | 26x12.00-12 |
New Holland Workmaster 25S attachments
| Description | 60" mid-mount mower deck / snowblower / blade / front-end loader / backhoe |
|---|
References
| Description | Under 60-HP Tractors published in 2017, by New Holland |
|---|
Variants
| Farmall 25SC | similar CaseIH model |
|---|
Workmaster 25S Serial Numbers
| Location: | Serial number plate on the left side of the frame, above the front axle. |
|---|